The life of the coating will last as long as the item, providing you avoid contact with harmful chemicals. The warranty is a FULL 4 Years on the 2 PAK Coating against manufacture defeats including; Pealing, Flaking and blistering.

Yes. We have available the same range of patterns and we use the same technique and process, however Our coatings are all done by hand and not mass-produced so quality we feel is higher. Also we use up to 3 Clear Coats.

YES. As the procedure uses water submersion as part of the process and is then coated in a clear sealer. Prior to delivery it provides a 100% water proofing characters. Items including metals that are coated will no longer be subject to rust and will not require cleaning or oiling to the coated surface/s.

You can change the coating as often as you like.

The process works 100% with synthetic, plastics, woods & timbers ,blued and stainless steel barrels. Basically any item that is 3-Dimensional and non porous can be coated.

As the top coat is a clear sealer the finish and durability is best compared to that of the paint finish on a New car. However it is important that you take care not to let it come into contact with harmful Chemicals in the same way you would not let your car come into the same contact. Our 2PAK Finish provides the best protection against scratches.

You need to remove all accessories such as slings, bipods, swivels etc. Store them until your firearm is returned. Scopes unless you are having your scope coated dont send it. All Firearms fitted with scopes are bore sighted on re assembly at no charge.

This is a simple step, simply use a clean chemical free damp cloth and run over all the coated surfaces. Note: The full workings such as the interior bore (Barrel) will and is still required to be cleaned as you have always done. Trigger and actions are also the same and require the same service.

Yes. As the item needs to be thoroughly cleaned and treated prior to the coating we can apply repairs at an extra charge. Our Repair Treatment will fill and remove imperfections such as; gouges, dents and rust. As this is an extra service a quote will be provided on inspection.

It does not compare. We DO NOT USE HEAT to apply any part of our coating and pattern. We use a liquid that once applied seals the pattern with a strong automotive 2PAK clear coating. Our finished product is not as thick and will not disrupt any bedding. Our coating can be removed if you want to change the look later. Ceramic Coatings are permanent. The other main difference is we can provide full colour 3D patterns where Ceramic style coatings can only air brush patterns in limited styles and colours. Our turnaround time is much faster than ceramic coatings and our cost to supply the coating is much lower as less labour is required. The Finished look? No comparison.

Most of the American/Canadian patterns such as Real tree TM (real tree is a registered trademark) are not suited to the Australian market. We like to think as Australians and as an Australian owned and run business where we have a very different scenery to the USA we do not need or want to push their market here when so many others available. We have a large supply of manufactures to choose from, only the highest quality films are used. So we save you money. Many of the American/Canadian patterns require expensive licensing fees that are only passed on to the consumer we want to limit the expense.

Yes if you really want it and are happy to pay the extra cost we can supply it and carry out the work for you at an extra charge, there is about an extra 5 day turn around time.